Mightex BLS-1000-2, BLS-3000-2 and BLS-13000-1 LED controllers are designed for driving Mightex LED sources. The controllers have two operation modes:
Manual Mode: the output current can be controlled by manually turning the knobs; or
Trigger Mode: the output current can be controlled via an external analog input signal between 0 ~ 5V.
The control mode is selected with a slide switch on the front panel, and the factory default is “Manual” mode. Except for the BLS-13000-1, the controller also has a set of DIP switches on the rear panel, which allow one to set the range of the output current: 500/750/1,000mA for BLS-1000-2, and 1,000/2,000/3,000mA for BLS-3000-2, respectively. The factory default is set to 500mA for BLS-1000-2 and 1,000mA for BLS-3000-2, respectively. BLS-13000-1 has only one maximum current setting - 13,000mA.
When the controller is set to “Trigger” mode, the output current is fully controlled by the input analog signal (0-5V).
|Power Supply Input Voltage (DC), Vdc||9 ~ 12*||9||48||V|
|Power Supply Input Current (DC)||> total/combined channel current **||< 2.5A|
|Channel Driving Voltage (Max)||Vdc - 4.5||Vdc - 4||5.5||V|
|Output Driving Current Range||0 ~ 1,000||0 ~ 3,000||0 ~ 13,000||mA|
|Channel Output Power Limit||
|< 15||< 72||W|
|Channel Frequency Response||< 100||< 50||< 3||KHz|
|External Analog Input||0 ~ 5 ***||V|
Note: *When Vforward of LED load is more than 8V, 24V DC input might be used; **External analog voltage source should have 8+ mA of current driving capability;
*** The input current should be greater than the combined output current of the two channels.
FRONT PANEL AND REAR PANEL:
The Front Panel has a power switch and a power indicator. Each channel has its own slide switch (for selecting Manual or Trigger mode) and a turning knob (for adjusting output current).
The Rear Panel has a DC input plug (9 ~ 24Vdc). Each channel has a BNC connector for external trigger/analog voltage signal, a two-pin LED aero connector, and a pair of DIP switches to set the maximum current of the channel.
寸法：160mm (L) x 157mm (W) x 68mm (H)
- Dual Control Modes: manual or analog voltage-input
- Fast response - up to 100kHz modulation frequency
- BNC connectors for analog voltage inputs
- Simple connections
- Capable of driving variable loads
- Fluorescence excitation
- Testing instruments
- Medical instruments