The REA Series Laser Module delivers the reliability and performance of diode pumping to high power industrial and scientific laser systems, virtually eliminating the downtime experienced by older lamp-based laser technologies. Drive your laser system up to 650 watts of CW power @ 1064nm.

This reliable and efficient gain module can be used as the "engine" in new laser system development and production, or to convert your existing lamp-based designs to state-of-the-art diode pumping. The Nd:YAG laser rod is pumped by radial arrays of efficiently coupled long lifetime laser diode bars, and delivers good pump uniformity and stable lensing performance. The laser module requires between 60 - 120 VDC diode bias from a reliable solid-state driver, and is cooled by re-circulating filtered water from a simple chiller system.

ラインアップ

型番をクリックしますと、データシート(PDF)がご覧になれます。

型番 ロッド径*1 出力*2 動作電圧*3 動作電流*2
4 mm x 126 mm  140 W 60 VDC 0-38 A
5 mm x 126 mm  250 W 60 VDC 0-50 A
6.35 mm x 126 mm  275 W 60 VDC 0-50 A
5 mm x 146 mm  200 W 80 VDC 0-38 A
5 mm x 146 mm  400 W 80 VDC 0-50 A
6.35 mm x 146 mm  450 W 80 VDC 0-50 A
5 mm x 167 mm  500 W 100 VDC 0-50 A
6.35 mm x 167 mm  550 W 100 VDC 0-50 A
5 mm x 188 mm  600 W 120 VDC 0-50 A
6.35 mm x 188 mm  650 W 120 VDC 0-50 A
  • *1
    0.4% or 0.6% Nd doping.
  • *2
    Minimum 1064 nm multi-mode output in a short cavity (280 ± 5 mm flat HR/flat 70%R OC) CW oscillator arrangement at delivery.
    Nominal Drive Current 25A and 40A for IC2H and IC4H respectively.
  • *3
    Max current is 38A and 50A for 1C2H and 1C4H respectively. Approximate required voltage at the pump head stated w/o consideration for inefficiencies in the electrical system.
  • Pulsed versions available.

この製品に関するお問合せフォーム

フォームが表示されるまでしばらくお待ちください。

しばらくお待ちいただいてもフォームが表示されない場合、恐れ入りますが こちら までお問合せください。

ページトップへ