壁面せん断応力センサ MicroPro™
The microPro™ shear stress sensor measures the wall shear using a near-wall traversing 1-D miniLDV. It is designed to automatically obtain the mean velocities at a number of points within the log region and possibly within the linear region of laminar or turbulent boundary layer. The velocity data are then used to obtain the best estimate for velocity gradient at the wall. Knowing the coefficient of viscosity, the wall shear stress is then calculated. MSE’s microPro shear stress sensor requires no alignment or calibration by the user.
-
MicroPro™
-
システム全体
- Works as well for any transparent medium, including air and water.
- Self-contained
- No alignment needed
- Calibration done at the factory
- Battery operated option
- Waterproof and temperature resistant housing option
- Wall shear stress measurements
- Drag reduction
- Turbulence mixing
- Marine full-scale and modelscale vessel performance measurements
- Flow quality diagnostics
- Micro channels
- Wind, water, and oil tunnels and channels
- Boundary layer studies
MEASUREMENT SPECIFICATIONS | |
Shear stress range | 0.7 to 6500 Pa (water) 0.015 to 140 Pa (air) Other ranges please specify |
Repeatability | 97% |
Accuracy | 97% typical |
PROBE VOLUME | |
PV dimensions (x by y by z) | 15 x 30 x 80 mm |
Standoff distances (air / water) | Up to 15 mm |
PROBE SPECIFICATIONS | |
Probe weight | 500 g |
Dimensions | 40 x 60 x 150 mm |
LASER SPECIFICATIONS | |
Laser power | 110 mW |
Wave length | 658 nm |
Laser type | Class IIIb |
OPERATING PARAMETERS | |
Temperature | 0 to 55°C |
Pressure | Up to 3 bar |
PC requirements | Laptop or PC |
OPTIONAL FEATURES | |
High pressure sensor (please specify maximum pressure) Submerged probe | |
POWER SUPPLY | |
12 VDC Universal |
- 壁面せん断応力センサ MicroPro™
203KB
製品に関するお問い合わせフォーム
フォームが表示されるまでしばらくお待ち下さい。
恐れ入りますが、しばらくお待ちいただいてもフォームが表示されない場合は、こちらまでお問い合わせください。