フェムト社のホームページへ

可変ゲイン低ノイズ電流アンプ DLPCA-200

可変ゲイン低ノイズ電流アンプ DLPCA-200

Variable Gain Low Noise Current Amplifier DLPCA-200

  • Transimpedance Gain from 103 to 1011 V/A
  • Input Noise down to 4.3 fA/√Hz
  • Bandwidth up to 500 kHz
  • Rise Time down to 700 ns
  • Adjustable Bias Voltage
  • Manual and Remote Control
  • Photodiode and Photomultiplier Amplifier
  • Scanning Tunneling Microscopy (STM)
  • Spectroscopy
  • Beam Monitoring for Particle Accelerators / Synchrotrons
  • Ionization Detectors
  • Preamplifier for Lock-Ins, A/D-Converters etc.
Model DLPCA-200
Performance Range Low Noise High Speed
Transimpedance
[V/A]
103 104 105 106 107 108 109 105 106 107 108 109 1010 1011
Bandwidth
(- 3 dB) [kHz]
500 500 400 200 50 7 1.1 500 500 400 200 50 7 1.1
Rise Time
(10%-90%)
700 ns 700 ns 900 ns 1.8 µs 7 µs 50 µs 300 µs 700 ns 700 ns 900 ns 1.8 µs 7 µs 50 µs 300 µs
Equ. Input Noise
[/√Hz]
20 pA 2.3 pA 450 fA 130 fA 43 fA 13 fA 4.3 fA 13 pA 1.8 pA 440 fA 130 fA 43 fA 13 fA 4.3 fA
Accuracy
Performance
Gain ± 1 %, Flatness 0.1 dB
Low Pass Filter Switchable to 10 Hz
Output
Performance
± 10 V, ± 30 mA
Bias Voltage ± 10 V, max. 22 mA, Connected to Shield of BNC Input Socket, Switchable to GND
Power Supply ± 15 V, + 120 mA / - 80 mA typ., ± 200 mA recommended
Control
Interface
5 Opto-Isolated Digital Inputs, TTL/CMOS Compatible, Analog Offset Control Voltage Input
Case 170 x 60 x 45 mm (L x W x H), Weight 320 g (0.74 lb.)
Download Datasheet PDF120KB
Offset adjustable by trimpot or external control voltage. LED overload indication. Input protected against ± 3 kV transients. Output short-circuit protected. Power supply via 3-pin LEMO socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet or contact FEMTO.
お見積・お問い合せ

製品一覧へ戻るFEMTO Messtechnik社の製品一覧へ戻る